JIANGSU TIANCHENG GROUP LIMITED
Yaoguan Town, Changzhou City, Jiangsu Province,China
+86-519-88387662
+86-519-85121683
steel_tube
steeltube.china
Tiancheng_Group
josen_dong
rolls, axles, screws, cylinders, crankshafts, heat treated machine parts.
| SAE 1030 | ||||
| Chemical composition: C=0.30%, Mn=0.75%, P=0.04% max, S=0.05% max | ||||
| Property | Value in metric unit | Value in US unit | ||
| Density | 7.872 *10³ | kg/m³ | 491.4 | lb/ft³ |
|---|---|---|---|---|
| Modulus of elasticity | 200 | GPa | 29000 | ksi |
| Thermal expansion (20 ºC) | 11.7*10-6 | ºCˉ¹ | 6.5*10-6 | in/(in* ºF) |
| Specific heat capacity | 486 | J/(kg*K) | 0.116 | BTU/(lb*ºF) |
| Thermal conductivity | 48.7 | W/(m*K) | 338 | BTU*in/(hr*ft²*ºF) |
| Electric resistivity | 1.66*10-7 | Ohm*m | 1.66*10-5 | Ohm*cm |
| Tensile strength (hot rolled) | 470 | MPa | 68200 | psi |
| Yield strength (hot rolled) | 260 | MPa | 37700 | psi |
| Elongation (hot rolled) | 20 | % | 20 | % |
| Hardness (hot rolled) | 75 | RB | 75 | RB |
| Tensile strength (cold drawn) | 525 | MPa | 76100 | psi |
| Yield strength (cold drawn) | 440 | MPa | 63800 | psi |
| Elongation (cold drawn) | 12 | % | 12 | % |
| Hardness (cold drawn) | 80 | RB | 80 | RB |
UNS# G10300 1030, C1030, CS1030 CARBON STEEL
ASTM A-108 STANDARD QUALITY , COLD FINISHED , CARBON STEEL BARS
ASTM A-29 GENERAL REQUIREMENTS FOR CARBON & ALLOY BARS, WROUGHT & COLD-FINISHED
ASTM A-510 GENERAL REQUIREMENTS FOR WIRE RODS & COURSE ROUND WIRE, CARBON STEEL
ASTM A-512 COLD-DRAWN BUTTWELD CARBON STEEL MECHANICAL TUBING
ASTM A-513 ELECTRIC-RESISTANT-WELDED CARBON & ALLOY TUBING
ASTM A-519 SEAMLESS CARBON & ALLOY MECHANICAL TUBING
ASTM A-544 SPEC. FOR CARBON STEEL WIRE, SCRAPLESS NUT QUALITY
ASTM A-545 SPECIFICATION FOR STEEL WIRE, CARBON, COLD HEADING QUALITY FOR MACHINE SCREWS
ASTM A-546 SPEC. FOR MED-HIGH CARBON STEEL WIRE, COLD-HEADING QUALITY, FOR HEX HEAD BOLTS
ASTM A-576 HOT-WROUGHT, SPECIAL QUALITY CARBON STEEL BARS
ASTM A-682 STRIP, HIGH-CARBON, COLD-ROLLED, SPRING QUALITY, GENERAL REQUIREMENTS
ASTM A-711 STANDARD SPEC. FOR STEEL FORGING STOCK
ASTM A-830 CHEMICAL COMPOSITION REQUIREMENTS FOR STRUCTURAL QUALITY PLATES
MIL-S-10520D STEEL, FORGINGS, FOR PROJECTILE STOCK (CLOSEST CHEMICAL MATCH)
MIL-S-11310E STEEL BARS, CARBON, HOT-ROLLED, FOR SHAPING INCLUDING COLD EXTRUSION
MIL-S-46070 STEEL BAR FOR PROJECTILE STOCK
QQ-S-631 STEEL BARS, CARBON, HOT-ROLLED (SPECIAL QUALITY)
QQ-S-633A STEEL BARS, CARBON, COLD-FINISHED & HOT ROLLED (GENERAL PURPOSE)
QQ-S-00640 STEEL, CARBON, SHEET AND STRIP
QQ-S-700D STEEL SHEET & STRIP, MEDIUM & HIGH CARBON
SAE J1397 ESTIMATED MECHANICAL PROPERTIES & MACHINABILITY OF STEEL BARS
SAE J403 CHEMICAL COMPOSITIONS OF SAE CARBON STEELS
SAE J412 GENERAL CHARACTERISTICS & HEAT TREATMENTS OF STEELS GENERAL CHARACTERISTICS & HEAT TREATMENTS OF STEELS
Bar
Extrusion-shapes
Forge
Rolled Rings
Wire