JIANGSU TIANCHENG GROUP LIMITED
Yaoguan Town, Changzhou City, Jiangsu Province,China
+86-519-88387662
+86-519-85121683
steel_tube
steeltube.china
Tiancheng_Group
josen_dong
1095 C .90-1.03 Mn .50/.50 P .04 max S .05 max
AISI 1095 spring steel can be hardened and tempered and polished, edged and blued.
Available in either Rc 50 Spring Temper or in custom-hardened and tempered condition up to Rc 62, AISI 1095 or 1075 carbon steel is a good, economical material choice where corrosion is not expected to be a problem, and where material is a significant component of total blade cost (as is the case with large, thick blades, or when production quantities are quite high). 1095 or 1075 carbon steel is also a good candidate on blades that need to be selectively hardened by induction heating.
springs or cutting tools requiring sharp cutting edges such as grass or grain cutting tools
UNS# G10950 1095, C1095 HIGH CARBON STEEL
AMS 5121G STEEL, SHEET & STRIP
AMS 5122G STEEL STRIP
AMS 7304D STEEL, SPRINGS
ASTM A-108 STANDARD QUALITY , COLD FINISHED , CARBON STEEL BARS
ASTM A-29 GENERAL REQUIREMENTS FOR CARBON & ALLOY BARS, WROUGHT & COLD-FINISHED
ASTM A-510 GENERAL REQUIREMENTS FOR WIRE RODS & COURSE ROUND WIRE, CARBON STEEL
ASTM A-576 HOT-WROUGHT, SPECIAL QUALITY CARBON STEEL BARS
ASTM A-682 STRIP, HIGH-CARBON, COLD-ROLLED, SPRING QUALITY, GENERAL REQUIREMENTS
ASTM A-711 STANDARD SPEC. FOR STEEL FORGING STOCK
ASTM A-713 WIRE, HIGH-CARBON SPRING, FOR HEAT TREATED COMPONENTS
ASTM A-830 CHEMICAL COMPOSITION REQUIREMENTS FOR STRUCTURAL QUALITY PLATES
MIL-S-16788A (C10) STEEL, CARBON, HOT-ROLLED OR FORGED (BLOOMS, BILLETS, & SLABS FOR REFORGING)
MIL-S-46049C STRIP, METAL, CARBON STEEL, COLD ROLLED, HARDENED & TEMPERED SPRING QUALITY
MIL-S-7947A STEEL, SHEET & STRIP (1095) (AIRCRAFT QUALITY)
MIL-S-8559A STEEL BARS, CARBON, AISI (1095) (AIRCRAFT QUALITY)
QQ-S-631 STEEL BARS, CARBON, HOT-ROLLED (SPECIAL QUALITY)
QQ-S-633A STEEL BARS, CARBON, COLD-FINISHED & HOT ROLLED (GENERAL PURPOSE)
QQ-S-00640 STEEL, CARBON, SHEET AND STRIP
QQ-S-700D STEEL SHEET & STRIP, MEDIUM & HIGH CARBON
SAE J1397 ESTIMATED MECHANICAL PROPERTIES & MACHINABILITY OF STEEL BARS
SAE J403 CHEMICAL COMPOSITIONS OF SAE CARBON STEELS
SAE J412 GENERAL CHARACTERISTICS & HEAT TREATMENTS OF STEELS GENERAL CHARACTERISTICS & HEAT TREATMENTS OF STEELS
Coil
Forge
Plate
Rectangle Bar
Sheet
Shim Stock
Strip
Wire
| SAE 1090 | ||||
| Chemical composition: C=0.90%, Mn=0.75%, P=0.04% max, S=0.05% max | ||||
| Property | Value in metric unit | Value in US unit | ||
| Density | 7.872 *10³ | kg/m³ | 491.4 | lb/ft³ |
|---|---|---|---|---|
| Modulus of elasticity | 202 | GPa | 29300 | ksi |
| Thermal expansion (20 ºC) | 11.5*10-6 | ºCˉ¹ | 6.39*10-6 | in/(in* ºF) |
| Specific heat capacity | 473 | J/(kg*K) | 0.113 | BTU/(lb*ºF) |
| Thermal conductivity | 49.8 | W/(m*K) | 345 | BTU*in/(hr*ft²*ºF) |
| Electric resistivity | 1.74*10-7 | Ohm*m | 1.74*10-5 | Ohm*cm |
| Tensile strength(cold drawn and annealed) | 696 | MPa | 101000 | psi |
| Yield strength(cold drawn and annealed) | 540 | MPa | 78300 | psi |
| Elongation(cold drawn and annealed) | 10 | % | 10 | % |
| Hardness(cold drawn and annealed) | 92 | RB | 92 | RB |
| Tensile strength (hot rolled) | 841 | MPa | 122000 | psi |
| Yield strength (hot rolled) | 460 | MPa | 66700 | psi |
| Elongation (hot rolled) | 10 | % | 10 | % |
| Hardness (hot rolled) | 98 | RB | 98 | RB |